#pandaboard IRC Log on pandaboard.org

Join the chat at pandaboard.org/irc

Index

IRC Log for 2011-05-20

Timestamps are in UTC.

  1. [00:00:24] * skorgon (~skorgon@149.199.62.254) Quit (Remote host closed the connection)
  2. [00:01:41] * plm (~plm@65.111.170.40) has joined #pandaboard
  3. [00:01:44] <plm> Hi all
  4. [00:02:29] * SGold (~Stan@cpe-075-176-065-103.carolina.res.rr.com) has joined #pandaboard
  5. [00:11:21] * ctyler (~chris@global.proximity.on.ca) has joined #pandaboard
  6. [00:22:14] * dreamingduck (~deamingdu@14.36.51.196) has joined #pandaboard
  7. [00:23:27] <dreamingduck> hi, everybody.
  8. [00:25:17] * MohammadAG (~MohammadA@Maemo/community/contributor/MohammadAG) Quit (Ping timeout: 276 seconds)
  9. [00:27:35] <dreamingduck> I succeed to boot pandaboard with pre-built-in froyo. but audio in/out doesn't work with L27.10.2-P2 image.
  10. [00:27:59] <dreamingduck> Is there anybody knows about this point?
  11. [00:40:31] * BThompson (~a0193480@nat/ti/x-lhziijipryhdcpfc) Quit (Ping timeout: 246 seconds)
  12. [00:49:32] * cooloney (~roc@116.227.203.64) has joined #pandaboard
  13. [00:54:22] * gbraad (~gbraad@fedora/gbraad) Quit (Ping timeout: 258 seconds)
  14. [00:55:25] * robclark (~robclark@ppp-70-129-137-58.dsl.rcsntx.swbell.net) has joined #pandaboard
  15. [00:55:25] * ChanServ sets mode +o robclark
  16. [01:06:07] * felipec (~felipec@a91-153-253-80.elisa-laajakaista.fi) Quit (Quit: Leaving)
  17. [01:07:43] * nhg (~Nipuna_Gu@cpe-76-184-243-196.tx.res.rr.com) has joined #pandaboard
  18. [01:09:05] * gbraad (~gbraad@76.164.216.98) has joined #pandaboard
  19. [01:09:05] * gbraad (~gbraad@76.164.216.98) Quit (Changing host)
  20. [01:09:05] * gbraad (~gbraad@fedora/gbraad) has joined #pandaboard
  21. [01:09:36] <noob> I've loaded minimal fs onto sd card but the board does not show any output on console. one LED stays lit...
  22. [01:10:21] <noob> Does it matter that it is a patriot sd card (4gb)..?
  23. [01:12:10] * nhg (~Nipuna_Gu@cpe-76-184-243-196.tx.res.rr.com) Quit (Quit: Leaving.)
  24. [01:14:49] * dreamingduck (~deamingdu@14.36.51.196) Quit (Ping timeout: 260 seconds)
  25. [01:16:13] * FredFred_ is now known as FredFred
  26. [01:20:37] * prpplague^2 is now known as prpplague
  27. [01:20:47] * ChanServ sets mode +o prpplague
  28. [01:25:42] <noob> phew...setting last cylinder size option to +64M (for boot partition) helps
  29. [01:36:11] <mru> the boot partition must be an even number of sectors
  30. [01:36:17] <mru> cylinders are irrelevant
  31. [01:36:27] * dreamingduck (~deamingdu@14.36.51.196) has joined #pandaboard
  32. [01:36:29] <mru> sd cards are rectangular
  33. [01:37:13] * gbraad (~gbraad@fedora/gbraad) Quit (Ping timeout: 246 seconds)
  34. [01:37:28] <noob> well, I used +1024M before...that didnt seem to work.
  35. [01:37:53] <noob> I could see the files well and good when I plug it into the linux box but on the board, nothing seemed to happen.
  36. [01:37:59] <noob> with 1024M setting.
  37. [01:38:51] <dreamingduck> I failed to boot minimal fs with 4GB SDCard, but succeded with 2GB microSD.
  38. [01:40:47] <noob> dreamingduck: gotta go through the trials....looks like.
  39. [01:41:56] <dreamingduck> I don't remember...
  40. [01:42:24] * aeboccia_ (~aeboccia@CPE0026f320ecd0-CM0026f320eccd.cpe.net.cable.rogers.com) has joined #pandaboard
  41. [01:43:26] * aeboccia_ (~aeboccia@CPE0026f320ecd0-CM0026f320eccd.cpe.net.cable.rogers.com) Quit (Client Quit)
  42. [01:46:59] <ds2> but so are hard drives ;)
  43. [01:50:46] * BThompson (~a0193480@nat/ti/x-fdjutbipmhmlhmvu) has joined #pandaboard
  44. [01:56:27] <MrCurious> the sd card has to be configured with a certian number of cylinders, sectors...
  45. [01:57:02] <MrCurious> http://gumstix.org/create-a-bootable-microsd-card.html
  46. [01:57:20] <MrCurious> i BELIEVE that the sd is done the same between gumstix and pandaboard
  47. [01:57:30] <MrCurious> follow those directions and it should work
  48. [01:57:48] <MrCurious> of cource, use sources for pandaboard, just follow the directions enough to make the partitions and locate the files
  49. [01:59:09] * ctyler (~chris@global.proximity.on.ca) Quit (Ping timeout: 258 seconds)
  50. [01:59:52] * ctyler (~chris@global.proximity.on.ca) has joined #pandaboard
  51. [02:01:37] * plm (~plm@65.111.170.40) Quit (Quit: leaving)
  52. [02:09:26] <prpplague> ctyler: greetings
  53. [02:10:54] <prpplague> ho ho hum
  54. [02:11:14] * prpplague tries to figure out what extra features to add to the LVDS display board
  55. [02:11:43] <ds2> coffee warmer!
  56. [02:11:56] <ds2> arc welder
  57. [02:13:52] <prpplague> ds2: good suggestions
  58. [02:18:14] <ds2> the arc welder would be a good demo of LVDS... any common mode noise from the welder gets rejected by the DS
  59. [02:18:17] <ds2> ;)
  60. [02:18:50] <prpplague> hehe
  61. [02:19:27] * prpplague checks to see if there is an orcad lib for pca9633
  62. [02:19:57] * sakoman_ (~sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) Quit (Ping timeout: 248 seconds)
  63. [02:22:52] <ds2> what about a Nixie tube interface?
  64. [02:24:35] * TheSeven (~TheSeven@rockbox/developer/TheSeven) Quit (Disconnected by services)
  65. [02:24:44] * [7] (~TheSeven@rockbox/developer/TheSeven) has joined #pandaboard
  66. [02:27:27] * denix0 (~denix@pool-108-18-140-4.washdc.fios.verizon.net) Quit (Quit: http://arago-project.org)
  67. [02:30:12] * robclark (~robclark@ppp-70-129-137-58.dsl.rcsntx.swbell.net) Quit (Ping timeout: 258 seconds)
  68. [02:36:06] <prpplague> ds2: naw too modern
  69. [02:39:01] <prpplague> ds2: think anyone would want a level shifted uart header?
  70. [02:39:56] <ds2> left shift to what?
  71. [02:40:03] <ds2> level
  72. [02:40:21] * skorgon (~skorgon@d096.apm.etc.tu-bs.de) has joined #pandaboard
  73. [02:41:51] * Alison_Chaiken (~Alison_Ch@209-204-189-70.dsl.static.sonic.net) has joined #pandaboard
  74. [02:41:59] * FredFred (~anonymous@66-17-120-250-swiftelDSL.brookings.net) Quit (Ping timeout: 240 seconds)
  75. [02:42:58] <prpplague> ds2: from 1.8v to 3.3v
  76. [02:43:10] <prpplague> ds2: little easier for the hobbists
  77. [02:43:14] <ds2> that doesn't sound very useful
  78. [02:43:32] <ds2> but then I do level shifters for UART with a few 2N2222's in TO-92 package
  79. [02:44:28] <prpplague> ds2: yea, you aren't really my target audience
  80. [02:45:48] <ds2> it falls into it is so trivial why bother... you might as well put in overclocking strips for faster board ;)
  81. [02:47:01] <prpplague> ds2: hehe, yea well 1.8v to 3.3V level shifting isn't that trial to a lot of hobbists
  82. [02:48:43] <ds2> actually, 3.3V to 1.8V should be doable with a simple resistor assuming one reads the hardware specs very carefully
  83. [02:51:31] <prpplague> ds2: that's assuming a lot
  84. [02:51:55] <ds2> that is actually spec'ed out on quite a few parts from TI
  85. [02:52:18] <ds2> and Microchip actually suggested a trick like that on their app notes
  86. [02:53:43] <ds2> RTFM can be useful at times ;)
  87. [03:00:23] * mdomsch (~mdomsch@cl-283.dal-01.us.sixxs.net) has joined #pandaboard
  88. [03:02:49] <prpplague> ds2: indeed
  89. [03:02:58] <prpplague> ds2: doesn't mean that is what people do, hehe
  90. [03:07:02] * FredFred (~anonymous@66-17-120-250-swiftelDSL.brookings.net) has joined #pandaboard
  91. [03:07:11] * FredFred (~anonymous@66-17-120-250-swiftelDSL.brookings.net) Quit (Client Quit)
  92. [03:15:03] * sakoman_ (~sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) has joined #pandaboard
  93. [03:15:09] * emeb (~ericb@ip70-190-178-49.ph.ph.cox.net) Quit (Quit: Leaving.)
  94. [03:15:20] * dl9pf_ (~quassel@p5B21519A.dip.t-dialin.net) has joined #pandaboard
  95. [03:15:47] * gbraad (~gbraad@76.164.216.98) has joined #pandaboard
  96. [03:15:47] * gbraad (~gbraad@76.164.216.98) Quit (Changing host)
  97. [03:15:47] * gbraad (~gbraad@fedora/gbraad) has joined #pandaboard
  98. [03:15:55] * dl9pf (~quassel@opensuse/member/dl9pf) Quit (Ping timeout: 246 seconds)
  99. [03:17:40] * PaulW (~PaulW@CPE001310360dac-CM001e6b0f7310.cpe.net.cable.rogers.com) Quit (Ping timeout: 246 seconds)
  100. [03:19:26] <ds2> ~>
  101. [03:19:26] <ds2> ~>
  102. [03:19:28] <ds2> ~>
  103. [03:19:36] <ds2> blah
  104. [03:20:52] * PaulW (~PaulW@CPE001310360dac-CM001e6b0f7310.cpe.net.cable.rogers.com) has joined #pandaboard
  105. [03:22:46] * mgaunard (~mgaunard@lri5-31.lri.fr) Quit (Read error: Operation timed out)
  106. [03:23:43] <prpplague> ds2: hehe
  107. [03:25:20] <ds2> laptop went asleep so tcp retries took over
  108. [03:25:44] <ds2> apparently it interpeted <ENTER>~. to kill the ssh session as something else :(
  109. [03:27:20] * BThompson (~a0193480@nat/ti/x-fdjutbipmhmlhmvu) Quit (Remote host closed the connection)
  110. [03:27:50] * robclark (~robclark@ppp-70-129-137-58.dsl.rcsntx.swbell.net) has joined #pandaboard
  111. [03:27:50] * ChanServ sets mode +o robclark
  112. [03:36:35] <MrCurious> i would want a 3.3v level shifter
  113. [03:36:45] * robclark (~robclark@ppp-70-129-137-58.dsl.rcsntx.swbell.net) Quit (Ping timeout: 248 seconds)
  114. [03:37:07] * Vikas (~ubnuser@nat/ti/x-cshoygaodoxlemzk) has left #pandaboard
  115. [03:39:52] * mgaunard (~mgaunard@lri5-58.lri.fr) has joined #pandaboard
  116. [03:40:41] * Vikas (~ubnuser@nat/ti/x-sxxfbnohfmomgmrw) has joined #pandaboard
  117. [03:50:56] * GPSFan (~kenm@64.92.145.112) Quit (Remote host closed the connection)
  118. [04:01:09] * emeb_mac (~ericb@ip70-190-178-49.ph.ph.cox.net) has joined #pandaboard
  119. [04:09:23] * kidproquo (~sam@118-92-29-161.dsl.dyn.ihug.co.nz) Quit (Quit: Ex-Chat)
  120. [04:13:40] * mdomsch (~mdomsch@cl-283.dal-01.us.sixxs.net) Quit (Quit: Leaving)
  121. [04:17:45] <matthewpucc> hmm so are boot arguments the only way to get a different resolution out of pandaboard + ubuntu?
  122. [04:19:49] <ZeZu> ubuntu really doesn't like my usb hdd dock ..
  123. [04:28:44] * ZeZu (null@c-98-227-57-1.hsd1.in.comcast.net) Quit (Quit: ->nix)
  124. [04:46:59] * SGold (~Stan@cpe-075-176-065-103.carolina.res.rr.com) Quit (Quit: Leaving)
  125. [04:49:22] * lamawithonel_ (~lucas@pool-96-240-135-33.washdc.fios.verizon.net) Quit (Ping timeout: 246 seconds)
  126. [04:50:10] * lamawithonel_ (~lucas@pool-96-240-135-33.washdc.fios.verizon.net) has joined #pandaboard
  127. [04:51:35] * sumits (~sumit@192.91.66.189) has joined #pandaboard
  128. [04:51:35] * sumits (~sumit@192.91.66.189) Quit (Changing host)
  129. [04:51:35] * sumits (~sumit@linaro/sumits) has joined #pandaboard
  130. [04:55:46] * L84Supper (~ly@unaffiliated/l84supper) has joined #pandaboard
  131. [04:59:47] * lamawithonel_ (~lucas@pool-96-240-135-33.washdc.fios.verizon.net) Quit (Remote host closed the connection)
  132. [05:01:08] <pfefferz> hello
  133. [05:01:25] * lamawithonel (~lucas@pool-96-240-135-33.washdc.fios.verizon.net) has joined #pandaboard
  134. [05:22:16] * lamawithonel (~lucas@pool-96-240-135-33.washdc.fios.verizon.net) Quit (Ping timeout: 246 seconds)
  135. [05:23:22] * lamawithonel (~lucas@pool-96-240-135-33.washdc.fios.verizon.net) has joined #pandaboard
  136. [05:26:05] * lanthan (~ze@p54B7E4B8.dip.t-dialin.net) Quit (Ping timeout: 260 seconds)
  137. [05:29:16] * Tom___ (c2e4d832@gateway/web/freenode/ip.194.228.216.50) Quit (Quit: Page closed)
  138. [05:34:12] * tomeff (~Adium@ip-78-45-50-45.net.upcbroadband.cz) has joined #pandaboard
  139. [05:38:00] * lanthan (~ze@p54B7F5F4.dip.t-dialin.net) has joined #pandaboard
  140. [05:41:55] <prpplague> ho ho hum
  141. [05:42:06] * prpplague will need to finish this schematic tomorrow
  142. [05:46:38] <L84Supper> anyone know which disti has more Pandaboards in stock?
  143. [05:46:48] <spikebike> is there more than 1?
  144. [05:47:49] <L84Supper> 5 or 6 last time I checked, 2 in the US, 1 in Germany, 1 in India and a couple others
  145. [05:48:47] <spikebike> heh, I'm behind
  146. [05:49:01] <spikebike> last I checked it was only digikey in US
  147. [05:49:13] <spikebike> another had cases and the like
  148. [05:49:23] <L84Supper> http://pandaboard.org/content/buy
  149. [05:50:47] <spikebike> cool, I wonder how the quantities are doing
  150. [05:54:31] * cheasee (~vchrizz@78.142.179.175) Quit (Ping timeout: 258 seconds)
  151. [05:55:04] * micadeyeye (~micadeyey@dsl-185-142-254.dynamic.wa.co.za) has joined #pandaboard
  152. [06:09:10] <MrCurious> digikey has 0
  153. [06:09:10] * horchata (~carson@bacon.k2.t.u-tokyo.ac.jp) Quit (Quit: leaving)
  154. [06:09:10] * PBLogBot (~PircBot@teddy.pandaboard.org) Quit (Ping timeout: 240 seconds)
  155. [09:20:30] * PBLogBot (~PircBot@teddy.pandaboard.org) has joined #pandaboard
  156. [09:20:30] * Topic is 'OMAP discussion & development on PandaBoard Platform | Site: http://www.PandaBoard.org | Paste @ http://pastebin.pandaboard.org/ |Wiki: http://www.omappedia.com/wiki/PandaBoard | IRC logs: http://www.pandaboard.org/pbirclogs/'
  157. [09:20:30] * Set by prpplague!~danders@nat/ti/x-dhdrupnqudstvoyg on Mon May 16 15:39:24 UTC 2011
  158. [09:21:03] <[7]> new: nope
  159. [09:21:23] * florian (~fuchs@Maemo/community/contributor/florian) has joined #pandaboard
  160. [09:23:15] * bo09 (~borgan@ip68-105-60-156.pn.at.cox.net) Quit (Read error: Connection reset by peer)
  161. [09:23:41] * bo09 (~borgan@ip68-105-60-156.pn.at.cox.net) has joined #pandaboard
  162. [09:25:56] * maxoo (c03690e5@gateway/web/freenode/ip.192.54.144.229) Quit (Ping timeout: 252 seconds)
  163. [09:36:55] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Ping timeout: 260 seconds)
  164. [09:45:47] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) has joined #pandaboard
  165. [09:47:49] <new> Sorry to ping again, but its getting very tough for me to configure, Though i have successfully configure Accessp point for RAlink USB access point with compat-wireless and hostapd, it works ? Could not understand why its not working with pandaboard, all inputs will be appreciated?
  166. [09:49:30] * AndroUser (~androirc@2.106.40.196) Quit (Ping timeout: 258 seconds)
  167. [09:52:44] <guillaume_> hi
  168. [09:53:05] <guillaume_> anyone can help me on gingerbread boot?
  169. [09:53:22] <guillaume_> PandaBoard_L27.12.1-P2
  170. [09:53:37] * av500 has a dejy vu
  171. [09:53:40] <av500> dajy even
  172. [09:53:43] <av500> deja
  173. [09:53:49] <av500> ->coffee
  174. [10:02:22] * MMlosh (~MMlosh@2001:718:1e03:5168:200f:7fbe:371a:ad73) Quit (Quit: Bye...)
  175. [10:10:07] * MohammadAG (~MohammadA@Maemo/community/contributor/MohammadAG) has joined #pandaboard
  176. [10:11:15] * MohammadAG (~MohammadA@Maemo/community/contributor/MohammadAG) Quit (Read error: Connection reset by peer)
  177. [10:11:30] * MohammadAG (~MohammadA@Maemo/community/contributor/MohammadAG) has joined #pandaboard
  178. [10:17:01] <dreamingduck> I faild to boot gingerbread L27.12.1-P2. so I am using froyo.
  179. [10:19:57] <guillaume_> froyo works for mee too. But for gingerbread, I am blocked on boot logo
  180. [10:22:34] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) has joined #pandaboard
  181. [10:25:09] * hardwalker (~hardwalke@122-117-115-146.HINET-IP.hinet.net) Quit (Remote host closed the connection)
  182. [10:25:22] * pcacjr__ (~pcacjr@187.78.32.213) Quit (Ping timeout: 246 seconds)
  183. [10:28:00] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #pandaboard
  184. [10:29:45] <vrb> I managed to boot L27.12.1 android with Panda L27.10 kernel after lots of mucking up with init.rc
  185. [10:30:04] <vrb> no success so far with later version.. or the newer kernel
  186. [10:34:07] * gbraad (~gbraad@76.164.216.98) has joined #pandaboard
  187. [10:34:07] * gbraad (~gbraad@76.164.216.98) Quit (Changing host)
  188. [10:34:07] * gbraad (~gbraad@fedora/gbraad) has joined #pandaboard
  189. [10:40:29] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Ping timeout: 258 seconds)
  190. [10:43:56] * MohammadAG (~MohammadA@Maemo/community/contributor/MohammadAG) Quit (Ping timeout: 258 seconds)
  191. [10:52:29] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) has joined #pandaboard
  192. [10:54:19] * tomeff (~Adium@ip-78-45-50-45.net.upcbroadband.cz) has joined #pandaboard
  193. [10:56:29] <new> can someone provide me link for ubuntu kernel 2.6.39, for pandaboard?
  194. [10:56:35] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Ping timeout: 258 seconds)
  195. [10:59:42] * PaulW (~PaulW@CPE001310360dac-CM001e6b0f7310.cpe.net.cable.rogers.com) Quit (Quit: Leaving)
  196. [11:01:04] * kth (~kth@unaffiliated/kth) Quit (Ping timeout: 260 seconds)
  197. [11:07:14] * CaptainCrunch (~ken@HSI-KBW-078-042-073-011.hsi3.kabel-badenwuerttemberg.de) has joined #pandaboard
  198. [11:09:53] <rsalveti> new: 39 is still not in place with the useful patches to make most features to work
  199. [11:10:19] <rsalveti> most patches for the ubuntu 38 kernel are still not upstream
  200. [11:10:36] <rsalveti> so we need someone to rebase it first before having a working 39 kernel
  201. [11:11:22] <new> Thanks rsalveti:
  202. [11:11:49] * phdeswer (~philippe@192.100.124.156) has joined #pandaboard
  203. [11:21:55] * sraue (~stephan@xbmc/staff/sraue) Quit (Quit: Ex-Chat)
  204. [11:23:57] * jluisn (~quassel@187.115.172.24) has joined #pandaboard
  205. [11:25:44] * phdeswer (~philippe@192.100.124.156) Quit (Quit: Leaving)
  206. [11:26:03] * phdeswer (~philippe@192.100.124.156) has joined #pandaboard
  207. [11:29:35] * mgaunard (~mgaunard@lri5-31.lri.fr) Quit (Ping timeout: 276 seconds)
  208. [11:35:24] * its_shri (~shri@122.166.13.141) has left #pandaboard
  209. [11:43:01] * mgaunard (~mgaunard@lri5-58.lri.fr) has joined #pandaboard
  210. [11:45:56] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #pandaboard
  211. [11:53:41] * robclark (~robclark@ppp-70-129-137-58.dsl.rcsntx.swbell.net) has joined #pandaboard
  212. [11:53:41] * ChanServ sets mode +o robclark
  213. [11:55:09] * repier (~repier@2a01:e35:8783:480:222:fbff:fe12:8baa) has joined #pandaboard
  214. [11:55:10] * mrc3 (~ddiaz@189.157.116.240) Quit (Ping timeout: 260 seconds)
  215. [11:55:36] * lanthan (~ze@p50992b91.dip0.t-ipconnect.de) has joined #pandaboard
  216. [11:56:43] * lanthan (~ze@p50992b91.dip0.t-ipconnect.de) Quit (Max SendQ exceeded)
  217. [11:57:23] * MohammadAG (~MohammadA@pool-96-250-166-104.nycmny.fios.verizon.net) has joined #pandaboard
  218. [11:57:38] * lanthan (~ze@p50992b91.dip0.t-ipconnect.de) has joined #pandaboard
  219. [12:01:03] <hrw> can someone confirm my feeling? replugging of serial cable during work == dead serial until power cycle?
  220. [12:06:15] * CaptainCrunch (~ken@HSI-KBW-078-042-073-011.hsi3.kabel-badenwuerttemberg.de) Quit (Ping timeout: 260 seconds)
  221. [12:08:14] * mrc3 (~ddiaz@189.157.121.1) has joined #pandaboard
  222. [12:09:38] <mru> serial ports do not have hotplug detection, so that makes no sense
  223. [12:15:32] * mrc3 (~ddiaz@189.157.121.1) Quit (Ping timeout: 276 seconds)
  224. [12:21:00] <av500> hrw: ???
  225. [12:21:42] <hrw> I know
  226. [12:21:58] <av500> you mean on the panda?
  227. [12:22:00] <hrw> but I had to power cycle A1 to get it talk to serial
  228. [12:22:18] <av500> could be a gnd cycle or so that makes the serial lockup
  229. [12:22:36] * gustavoz (~gustavoz@host58.186-109-9.telecom.net.ar) has joined #pandaboard
  230. [12:22:43] <av500> i have to reboot my FDTIs quite often because they lock up when I plug/unplug serial
  231. [12:23:26] <hrw> thx
  232. [12:26:36] * mrc3 (~ddiaz@189.157.113.196) has joined #pandaboard
  233. [12:26:49] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Ping timeout: 246 seconds)
  234. [12:41:52] * spyro (~collabora@92.24.244.9) Quit (Ping timeout: 246 seconds)
  235. [12:42:55] * mrc3 (~ddiaz@189.157.113.196) Quit (Ping timeout: 246 seconds)
  236. [12:43:14] * new (4068838a@gateway/web/freenode/ip.64.104.131.138) Quit (Quit: Page closed)
  237. [12:56:15] * mrc3 (~ddiaz@189.157.117.129) has joined #pandaboard
  238. [12:57:58] * Openfree` (~df@61.170.192.233) has joined #pandaboard
  239. [13:00:42] * plm (~plm@65.111.170.40) has joined #pandaboard
  240. [13:00:45] <plm> Hi all
  241. [13:01:53] * robclark_ (~robclark@ppp-70-129-142-88.dsl.rcsntx.swbell.net) has joined #pandaboard
  242. [13:03:09] * robclark (~robclark@ppp-70-129-137-58.dsl.rcsntx.swbell.net) Quit (Ping timeout: 248 seconds)
  243. [13:07:29] <asgaroth-> hey there!
  244. [13:08:14] <asgaroth-> i rebuilt the kernel yesterday, following the instructions at http://omappedia.org/wiki/PandaBoard_L27.10.2-P1_Release_Notes
  245. [13:08:27] <asgaroth-> this time i made sure that the cherry picking and patching worked
  246. [13:10:31] <asgaroth-> ah wrong link
  247. [13:10:33] <asgaroth-> http://www.omappedia.org/wiki/PandaBoard_L27.12.1-P2_Release_Notes#Building_Kernel
  248. [13:10:38] <asgaroth-> these instructions i meant
  249. [13:10:48] <asgaroth-> i also used the new defconfig
  250. [13:11:02] <asgaroth-> but im getting I2C read: I/O error now
  251. [13:11:08] <asgaroth-> and the following is still there
  252. [13:11:40] <asgaroth-> init: critical process 'baseimage' exited 4 times in 4 minutes; rebooting into recovery mode
  253. [13:12:06] <asgaroth-> here is the (in my opinion) full log: http://pastebin.com/N2ZS0QVC
  254. [13:12:40] * robclark_ (~robclark@ppp-70-129-142-88.dsl.rcsntx.swbell.net) Quit (Ping timeout: 246 seconds)
  255. [13:14:11] * PaulW_cdot (~Paul@142.204.133.81) has joined #pandaboard
  256. [13:17:07] * MMlosh (~MMlosh@2001:470:1f0b:b78:e879:4665:a675:5930) has joined #pandaboard
  257. [13:18:57] * bo09 (~borgan@ip68-105-60-156.pn.at.cox.net) Quit (Quit: Leaving)
  258. [13:23:34] * pcacjr__ (~pcacjr@187.78.32.213) has joined #pandaboard
  259. [13:24:20] * Matt_S_G (~matt@188.52.65.188) has joined #pandaboard
  260. [13:25:47] <guillaume_> I think bootargs for PandaBoard_L27.12.1-P2 are : setenv bootargs 'console=ttyO2,115200n8 androidboot.console=ttyO2 mem=456M@0x80000000 mem=512M@0xA0000000 root=/dev/mmcblk0p2 rw rootdelay=2 init=/init vram="20M" omapfb.vram=0:8M omapdss.def_disp=hdmi consoleblank=0'
  261. [13:26:50] * JimmyDB (~JimmyDB@75-133-50-251.dhcp.trcy.mi.charter.com) has joined #pandaboard
  262. [13:26:51] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 258 seconds)
  263. [13:26:54] * kraiskil (~kraiskil@nat/nokia/x-bfchndfgpipiovsm) Quit (Quit: Leaving)
  264. [13:29:27] * jluisn (~quassel@187.115.172.24) Quit (Remote host closed the connection)
  265. [13:29:31] * robclark (~robclark@nat/ti/x-bwwwcjeubyerusan) has joined #pandaboard
  266. [13:29:31] * ChanServ sets mode +o robclark
  267. [13:30:31] * GPSFan (~kenm@64.92.145.112) has joined #pandaboard
  268. [13:30:57] <JimmyDB> Happy Friday!
  269. [13:32:04] * felipec (~felipec@nat/nokia/x-rkwiirhxfmtvqzkt) has joined #pandaboard
  270. [13:32:09] * bo09 (~borgan@ip68-105-60-156.pn.at.cox.net) has joined #pandaboard
  271. [13:36:58] * cooloney (~roc@116.227.203.64) has joined #pandaboard
  272. [13:37:05] <prpplague_afk> asgaroth-: you need to use the correct bootargs
  273. [13:37:18] <prpplague_afk> asgaroth-: or apply the patch to hardcode them
  274. [13:45:55] * mgaunard (~mgaunard@lri5-58.lri.fr) Quit (Ping timeout: 246 seconds)
  275. [13:46:13] * prpplague_afk is now known as prpplague^2
  276. [13:47:39] * robclark wonders if prpplague has telekinesis to be be able to type on IRC while afk ;-)
  277. [13:49:38] <prpplague^2> robclark: rfid implant
  278. [13:50:55] <robclark> heheh.. no bluetooth
  279. [13:51:31] <av500> he is typing in his sleep
  280. [13:53:45] * robclark needs coffee or he'll be typing in his sleep..
  281. [13:54:07] * prpplague^2 tries to decide if he wants to fight the rain driving into the office
  282. [13:54:20] <robclark> is it raining already?
  283. [13:54:23] <av500> prpplague^2: can u send some rain?
  284. [13:54:40] <robclark> I wonder if fedex can deliver that?
  285. [13:56:19] <JimmyDB> they would probably lose it
  286. [13:58:57] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #pandaboard
  287. [14:00:36] <guillaume_> I have seen that bootargs and bootcmd are not the same in PandaBoard_L27.12.1-P2_Release_Notes and theuboot patch
  288. [14:00:53] <guillaume_> none of them worked for me
  289. [14:01:19] * gbraad (~gbraad@fedora/gbraad) Quit (Ping timeout: 240 seconds)
  290. [14:01:25] * mgaunard (~mgaunard@lri5-31.lri.fr) has joined #pandaboard
  291. [14:02:00] <av500> then its prolly not the bootargs
  292. [14:02:35] <av500> maybe it's time to stare at code?
  293. [14:03:20] * gbraad (~gbraad@216.180.254.114) has joined #pandaboard
  294. [14:03:20] * gbraad (~gbraad@216.180.254.114) Quit (Changing host)
  295. [14:03:21] * gbraad (~gbraad@fedora/gbraad) has joined #pandaboard
  296. [14:03:59] <prpplague^2> guillaume_: there are only minor differences in the bootargs in the patch
  297. [14:04:18] <prpplague^2> guillaume_: functionally they are the same
  298. [14:04:44] <guillaume_> ok
  299. [14:04:55] <prpplague^2> guillaume_: pastebin you latest boot log
  300. [14:06:48] * prpplague^2 is now known as prpplague
  301. [14:07:35] <guillaume_> http://pastebin.pandaboard.org/index.php/view/93574702
  302. [14:08:03] * prpplague looks
  303. [14:08:35] * PaulW_cdot (~Paul@142.204.133.81) Quit (Ping timeout: 240 seconds)
  304. [14:10:54] * PaulW_cdot (~Paul@142.204.133.81) has joined #pandaboard
  305. [14:11:22] <prpplague> guillaume_: ok you have resolved the bootargs issue however you need to fix the audio
  306. [14:11:25] <prpplague> guillaume_: http://www.omapedia.org/wiki/Android_How-tos#Audio
  307. [14:13:12] <guillaume_> ok. I check that
  308. [14:13:15] <guillaume_> thx
  309. [14:13:43] <prpplague> guillaume_: fix that and you should up and running
  310. [14:15:10] * emeb_mac (~ericb@ip70-190-178-49.ph.ph.cox.net) has joined #pandaboard
  311. [14:15:50] * prpplague is now known as prpplague^2
  312. [14:16:10] * sraue (~stephan@xbmc/staff/sraue) has joined #pandaboard
  313. [14:24:38] * pfefferz (~zpfeffer@li114-223.members.linode.com) Quit (Quit: Leaving)
  314. [14:24:38] <guillaume_> I have patched the L27.12.1-P2/mydroid/device/ti/pandaboard/BoardConfig.mk
  315. [14:24:54] * gustavoz (~gustavoz@host58.186-109-9.telecom.net.ar) Quit (Quit: Leaving)
  316. [14:25:07] <guillaume_> have I to clean all AFS? befor rebuild?
  317. [14:29:21] * phdeswer (~philippe@192.100.124.156) Quit (Ping timeout: 240 seconds)
  318. [14:30:26] * sumits (~sumit@linaro/sumits) Quit (Quit: Leaving)
  319. [14:30:49] * gustavoz (~gustavoz@host253.201-252-48.telecom.net.ar) has joined #pandaboard
  320. [14:31:07] * zpfeffer (~zpfeffer@li114-223.members.linode.com) has joined #pandaboard
  321. [14:31:24] <guillaume_> a long time to rebuild...
  322. [14:31:28] <zpfeffer> exit
  323. [14:31:32] * zpfeffer (~zpfeffer@li114-223.members.linode.com) Quit (Client Quit)
  324. [14:34:39] * emeb_mac (~ericb@ip70-190-178-49.ph.ph.cox.net) Quit (Quit: emeb_mac)
  325. [14:34:53] * felipec (~felipec@nat/nokia/x-rkwiirhxfmtvqzkt) Quit (Quit: Leaving)
  326. [14:36:54] * trem (~trem@AToulouse-256-1-137-33.w90-45.abo.wanadoo.fr) has joined #pandaboard
  327. [14:45:11] <asgaroth-> thanks prpplague^2 ill check the bootargs
  328. [14:50:17] <guillaume_> prpplague : with the patch, I get build error on libasound.so. http://pastebin.pandaboard.org/index.php/view/16393050
  329. [14:50:25] * pfefferz (~zpfeffer@li114-223.members.linode.com) has joined #pandaboard
  330. [14:50:47] <guillaume_> are there more things to patch?
  331. [14:50:57] * openfree (~dennis@116.228.88.131) Quit (Ping timeout: 240 seconds)
  332. [14:52:11] * openfree (~dennis@116.228.88.131) has joined #pandaboard
  333. [14:56:33] * jayabharath (~jayabhara@nat/ti/x-phucevasuzrwqjkb) has joined #pandaboard
  334. [14:58:15] * nhg (~a0864305@nat/ti/x-bhdvcexsyqaszmfo) has joined #pandaboard
  335. [14:58:48] * trem (~trem@AToulouse-256-1-137-33.w90-45.abo.wanadoo.fr) Quit (Read error: Operation timed out)
  336. [14:59:56] * trem (~trem@AToulouse-256-1-137-33.w90-45.abo.wanadoo.fr) has joined #pandaboard
  337. [15:00:22] * micadeyeye (~micadeyey@dsl-185-142-254.dynamic.wa.co.za) has joined #pandaboard
  338. [15:02:01] * cooloney (~roc@116.227.203.64) Quit (Quit: Lost terminal)
  339. [15:03:11] * pfefferz (~zpfeffer@li114-223.members.linode.com) Quit (Changing host)
  340. [15:03:11] * pfefferz (~zpfeffer@linaro/pfefferz) has joined #pandaboard
  341. [15:04:03] <pfefferz> v
  342. [15:08:15] <guillaume_> any solution for android audio configuration option?
  343. [15:08:52] * emeb (~ericb@ip70-190-178-49.ph.ph.cox.net) has joined #pandaboard
  344. [15:11:27] * pcacjr__ (~pcacjr@187.78.32.213) Quit (Ping timeout: 244 seconds)
  345. [15:15:35] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) has joined #pandaboard
  346. [15:15:50] * orbarron (~orb@nat/ti/x-voesnfniezlezppk) has joined #pandaboard
  347. [15:15:50] * ChanServ sets mode +o orbarron
  348. [15:18:51] * vgrade (~martinbro@cpc2-nrte22-2-0-cust128.8-4.cable.virginmedia.com) Quit ()
  349. [15:19:02] * PaulW_cdot (~Paul@142.204.133.81) Quit (Ping timeout: 276 seconds)
  350. [15:20:10] * tshelbur (~tshelbur@nat/ti/x-rqzjfgpcreiypmdl) has joined #pandaboard
  351. [15:21:43] * PaulW_cdot (~Paul@142.204.133.81) has joined #pandaboard
  352. [15:22:10] * tshelbur (~tshelbur@nat/ti/x-rqzjfgpcreiypmdl) has left #pandaboard
  353. [15:22:17] * bambee (~quassel@77.196.57.100) has joined #pandaboard
  354. [15:23:19] * Openfree` (~df@61.170.192.233) Quit (Remote host closed the connection)
  355. [15:25:58] * skorgon (~skorgon@149.199.62.254) has joined #pandaboard
  356. [15:29:14] <av500> prpplague^2: it worked!
  357. [15:33:23] <guillaume_> ?
  358. [15:33:44] * oc2k1 (~oc2k1@sey74-1-88-174-149-26.fbx.proxad.net) Quit (Ping timeout: 258 seconds)
  359. [15:35:07] * prpplague (~danders@nat/ti/x-sonnpjrjoqofcqph) has joined #pandaboard
  360. [15:37:15] * ChanServ sets mode +o prpplague
  361. [15:38:16] * kaspter (~kaspter@222.65.221.62) has joined #pandaboard
  362. [15:41:30] * AndroUser2 (~androirc@2.109.114.27) has joined #pandaboard
  363. [15:43:02] * dreamingduck (~deamingdu@14.36.51.196) Quit ()
  364. [15:49:34] <guillaume_> prpplague : you were talking to me?
  365. [15:49:36] * AndroUser2 (~androirc@2.109.114.27) Quit (Quit: AndroIRC)
  366. [15:49:50] <prpplague> guillaume_: yes
  367. [15:50:00] <guillaume_> so I dont understand
  368. [15:50:14] <prpplague> guillaume_: just saying if you address the audio configuration, the system should finish booting
  369. [15:50:18] <guillaume_> you said compilation used to work with generic?
  370. [15:50:43] <guillaume_> mhh. got compilation error with generic
  371. [15:50:57] <prpplague> guillaume_: what was the error?
  372. [15:51:08] <guillaume_> http://pastebin.pandaboard.org/index.php/view/16393050
  373. [15:52:11] <guillaume_> it seems that fmapp need libasound
  374. [15:52:25] <av500> fm....
  375. [15:52:28] <av500> lol
  376. [15:52:35] <guillaume_> yep
  377. [15:52:55] <prpplague> odd
  378. [15:52:55] * ttyandroid (~tty665@189-015-215-050.xd-dynamic.ctbcnetsuper.com.br) has joined #pandaboard
  379. [15:52:59] * prpplague checks the board file
  380. [15:53:16] <guillaume_> just have to find where to disable it
  381. [15:53:25] <av500> remove the fmapp
  382. [15:53:29] <av500> its 2011
  383. [15:54:20] <guillaume_> trying # FM BUILD_FM_RADIO := false FM_CHR_DEV_ST := false
  384. [15:54:43] <prpplague> guillaume_: yea, just comment those out
  385. [15:55:09] * ttyandroid (~tty665@189-015-215-050.xd-dynamic.ctbcnetsuper.com.br) has left #pandaboard
  386. [15:55:12] * Matt_S_G (~matt@188.52.65.188) Quit (Ping timeout: 258 seconds)
  387. [15:55:51] <L84Supper> anyone know if these schematics are as built or just a reasonable facsimile? http://pandaboard.org/sites/default/files/board_reference/EA1/750-2152-001-SCH_REVEA1.pdf
  388. [15:56:20] <prpplague> L84Supper: they are as built for A1
  389. [15:57:09] <L84Supper> prpplague: is A1 the current rev that is shipping?
  390. [15:57:32] <av500> A3 is
  391. [15:57:54] <guillaume_> alsa needed for out/target/product/pandaboard/obj/EXECUTABLES/audiotest_intermediates/LINKED/audiotest
  392. [15:58:17] <guillaume_> where to disable that?
  393. [15:58:41] <prpplague> L84Supper: http://www.omapedia.org/wiki/PandaBoard_Revisions
  394. [15:59:03] <prpplague> guillaume_: you can add a ifdef in the android.mk file for the audiotest
  395. [15:59:37] * trem (~trem@AToulouse-256-1-137-33.w90-45.abo.wanadoo.fr) Quit (Quit: Ex-Chat)
  396. [16:00:28] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #pandaboard
  397. [16:00:55] <L84Supper> prpplague: is there a .sch of the schematics? I so far have only found the .pdf version
  398. [16:01:21] <prpplague> L84Supper: .sch is for what cad program?
  399. [16:01:22] * pcacjr__ (~pcacjr@187.78.1.59) has joined #pandaboard
  400. [16:01:36] * Andre_H (~german_wi@pD953222C.dip0.t-ipconnect.de) has joined #pandaboard
  401. [16:01:53] <L84Supper> prpplague: looks like the used capture/cadence/orcad
  402. [16:01:59] <L84Supper> they used
  403. [16:02:05] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 244 seconds)
  404. [16:02:17] <prpplague> L84Supper: yes orcad is the cad program of choice internally
  405. [16:02:33] <L84Supper> yay!
  406. [16:02:42] <prpplague> L84Supper: i've started converting it to kicad, but haven't finished
  407. [16:03:40] <guillaume_> in /device/ti/pandaboard/android.mk?
  408. [16:04:12] <orbarron> guillaume_: add ifeq ($(strip $(BOARD_USES_ALSA_AUDIO)),true) ... endif -- in test/audiohal_test/Android.mk
  409. [16:04:35] <L84Supper> prpplague: wow and Allegro, impressive
  410. [16:04:43] <prpplague> guillaume_: hardware/ti/omap3/test/audiohal_test
  411. [16:06:11] * orbarron wonders if we should just remove audio in current setup -- cuz we may have others poping up with the same issue
  412. [16:06:14] * gustavoz (~gustavoz@host253.201-252-48.telecom.net.ar) Quit (Quit: Leaving)
  413. [16:06:17] <L84Supper> prpplague: is there a native Capture file?
  414. [16:07:13] <orbarron> armin76: ping
  415. [16:07:46] <prpplague> L84Supper: should be right there next to the pdf
  416. [16:08:12] <guillaume_> thx! conpilation pass the problematic step
  417. [16:08:23] * RCFwork (~klaas@19.139-243-81.adsl-dyn.isp.belgacom.be) Quit (Quit: Leaving.)
  418. [16:09:21] * gustavoz (~gustavoz@host253.201-252-48.telecom.net.ar) has joined #pandaboard
  419. [16:09:24] * RCFwork (~klaas@19.139-243-81.adsl-dyn.isp.belgacom.be) has joined #pandaboard
  420. [16:09:25] <guillaume_> hope it works entirely
  421. [16:09:31] * pcacjr__ (~pcacjr@187.78.1.59) Quit (Ping timeout: 252 seconds)
  422. [16:09:56] <av500> guillaume_: add if(0) until it compiles :)
  423. [16:11:05] * RCFwork (~klaas@19.139-243-81.adsl-dyn.isp.belgacom.be) Quit (Client Quit)
  424. [16:11:06] * sraue (~stephan@xbmc/staff/sraue) Quit (Read error: No route to host)
  425. [16:11:27] <L84Supper> hmmm .pdf, .xls for the BOM and .brd + gerbers and drill files
  426. [16:11:36] * sraue (~stephan@xbmc/staff/sraue) has joined #pandaboard
  427. [16:11:48] <L84Supper> no .sch or Orcad project
  428. [16:12:09] <prpplague> L84Supper: dsn is for orcad
  429. [16:12:32] <av500> L84Supper: you want to make one yourself?
  430. [16:12:36] <L84Supper> no .dsn either :(
  431. [16:12:45] <L84Supper> I might make several
  432. [16:12:47] <prpplague> http://pandaboard.org/content/resources/references
  433. [16:13:08] * cheasee (~vchrizz@78.142.179.175) has joined #pandaboard
  434. [16:13:24] <L84Supper> ahh that page, thanks, I was looking at the other wiki page
  435. [16:16:04] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) has joined #pandaboard
  436. [16:19:03] <L84Supper> prpplague: just FYI you could print those cases in ~1 hour on a reprap with PLA or ABS, no tooling btw
  437. [16:19:34] <prpplague> L84Supper: yes i know, i have a FDM device to print them
  438. [16:19:45] * spyro (~collabora@92.24.248.195) has joined #pandaboard
  439. [16:19:53] * Arithmos (~Arithmos@81-65-177-29.rev.numericable.fr) has joined #pandaboard
  440. [16:22:49] <prpplague> L84Supper: http://pp3dp.com/
  441. [16:23:02] <prpplague> L84Supper: doesn't make sense if you are making 5000 pieces
  442. [16:23:13] <L84Supper> too slow with the up!
  443. [16:24:33] <prpplague> quality is better though
  444. [16:26:25] <L84Supper> heh... don't let the guys in the reprap channel hear that :)
  445. [16:27:58] * spyro (~collabora@92.24.248.195) Quit (Ping timeout: 246 seconds)
  446. [16:27:58] <prpplague> reprap is good, just not up to professional level yet
  447. [16:30:19] <L84Supper> print quality? or just the DIY with all the threaded rods and Arduino boards?
  448. [16:31:14] <prpplague> the whole package
  449. [16:31:24] <prpplague> its great if you are printing in your garage
  450. [16:31:55] <prpplague> not so great if you need a prototype case for a demo from a solid works file the next day
  451. [16:33:22] <L84Supper> what would you think of a DIY printer that could print your case in a few minutes?
  452. [16:33:26] * ndec (~a0919116@192.91.60.11) Quit (Quit: Leaving.)
  453. [16:33:42] <L84Supper> with +/- 50 micron res
  454. [16:33:48] * kaspter (~kaspter@222.65.221.62) Quit (Read error: Connection reset by peer)
  455. [16:34:50] <L84Supper> sometime this summer/fall
  456. [16:34:52] <lill> hi
  457. [16:34:58] <orbarron> hi
  458. [16:35:31] <lill> one question ;)
  459. [16:35:32] <prpplague> L84Supper: "DIY" automatically makes it a no
  460. [16:35:42] <orbarron> 1 answer :)
  461. [16:35:48] <lill> i am using http://www.omappedia.com/wiki/PandaBoard_L27.10.2-P1_Release_Notes for building froyo for pandaboard
  462. [16:36:01] <lill> cp -Rfp device/ti/blaze/buildspec.mk.default buildspec.mk
  463. [16:36:10] <lill> why should i use blaze buldspec?
  464. [16:36:15] <lill> +i
  465. [16:36:36] <prpplague> lill: because at the time of that release there wasnt a panda specific buildspec
  466. [16:36:47] <lill> hm ok
  467. [16:36:55] <prpplague> lill: panda and blaze are similar enough that the build could used from blaze for panda
  468. [16:37:09] <lill> mhm
  469. [16:37:29] <orbarron> you could move to L27.12.1-P2 and that has panda build spec -- but they are mostly the same as blaze
  470. [16:37:43] * oc2k1 (~oc2k1@195-132-216-184.rev.numericable.fr) has joined #pandaboard
  471. [16:38:31] <lill> thanks :)
  472. [16:38:45] <lill> ah
  473. [16:38:50] <orbarron> prpplague: wiki page works -- http://www.dropbox.com/gallery/1972518/1/Pandroid-L27.12.1-R2?h=140b63
  474. [16:38:50] <lill> but this is gingerbread?
  475. [16:38:55] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Quit: leaving)
  476. [16:38:57] <orbarron> lill: yeah
  477. [16:39:01] <orbarron> not sure what you need
  478. [16:39:02] <lill> i need froyo :/
  479. [16:39:05] <orbarron> ok
  480. [16:39:17] <lill> i needed gingerbread.. but now its froyo :/
  481. [16:39:40] <lill> my professor changed the version *sigh*
  482. [16:40:41] <prpplague> orbarron: dandy
  483. [16:48:47] * Andre_H (~german_wi@pD953222C.dip0.t-ipconnect.de) Quit (Quit: Leaving.)
  484. [16:51:25] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Ping timeout: 246 seconds)
  485. [16:59:55] <prpplague> ho ho hum
  486. [16:59:58] <prpplague> too much work to do
  487. [17:06:03] * lanthan (~ze@p50992b91.dip0.t-ipconnect.de) Quit (Quit: Ex-Chat)
  488. [17:08:13] <L84Supper> omap4430 boards out the back door in Shenzhen..... found another source for dev boards with LCD/touch + battery
  489. [17:10:47] <GrueMaster> Anyone work with omap4boot? I have been working with it all week, and I'm stuck getting our kernel to enable USB & ethernet when booting from usb.
  490. [17:14:46] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  491. [17:19:37] * mdomsch (~mdomsch@cl-283.dal-01.us.sixxs.net) has joined #pandaboard
  492. [17:19:40] * guillaume_ (d4517002@gateway/web/freenode/ip.212.81.112.2) Quit (Ping timeout: 252 seconds)
  493. [17:21:58] * opotin (~a0918900@nat/ti/x-wcgdmneryoamcyir) has left #pandaboard
  494. [17:23:05] <L84Supper> anyone working on RTAI for the omap4430?
  495. [17:26:17] * mdomsch (~mdomsch@cl-283.dal-01.us.sixxs.net) Quit (Quit: Leaving)
  496. [17:26:39] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 260 seconds)
  497. [17:28:16] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) has joined #pandaboard
  498. [17:36:26] * phdeswer (~philippe@a83-245-252-47.elisa-laajakaista.fi) has joined #pandaboard
  499. [17:39:28] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 241 seconds)
  500. [17:41:08] * NishanthMenon (~nmenon@nat/ti/x-xxzkkrhhejirzwuf) has joined #pandaboard
  501. [17:45:29] * repier (~repier@2a01:e35:8783:480:222:fbff:fe12:8baa) Quit (Quit: Leaving)
  502. [17:46:32] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) has joined #pandaboard
  503. [17:50:05] * MohammadAG_ (~MohammadA@Maemo/community/contributor/MohammadAG) Quit (Quit: Leaving)
  504. [17:50:11] <_av500_> there was a guy asking for xenomai
  505. [17:50:22] <_av500_> other than that, not heard about it here
  506. [17:52:24] <L84Supper> http://sourceforge.net/projects/rtai-cortex/files/
  507. [17:53:45] <jayabharath> L84Supper: i've sent Gilles Chanteperdrix a pandaboard and he was working on xenomai port in March...not sure where he stands
  508. [17:54:29] <jayabharath> not sure if anyone is workingon rtai for a9/omap4
  509. [18:01:27] * NightMonkey (debian-tor@pdpc/supporter/professional/nightmonkey) has joined #pandaboard
  510. [18:01:43] * sraue (~stephan@xbmc/staff/sraue) Quit (Ping timeout: 252 seconds)
  511. [18:02:02] * trem (~trem@AToulouse-256-1-137-33.w90-45.abo.wanadoo.fr) has joined #pandaboard
  512. [18:02:59] * j22 (816178c8@gateway/web/freenode/ip.129.97.120.200) has joined #pandaboard
  513. [18:03:59] <j22> hi. how come /proc/cpuinfo on the pandaboard tells me that it has only one processor
  514. [18:04:07] <j22> I thought it's a dualcore chip.
  515. [18:04:16] * sraue (~stephan@xbmc/staff/sraue) has joined #pandaboard
  516. [18:04:19] * negril (~negril@2002:1f10:75c6:0:21f:d0ff:fed4:7584) Quit (Read error: Operation timed out)
  517. [18:04:51] <jayabharath> j22: wierd.. what kernel / env are you using?
  518. [18:05:29] <j22> ubuntu linux 2.6.35
  519. [18:06:15] <j22> 2.6.35-903-omap4
  520. [18:08:09] * negril (~negril@2002:1f10:75c6:0:21f:d0ff:fed4:7584) has joined #pandaboard
  521. [18:10:00] <_av500_> j22: did you order the 2nd cpu upgrade?
  522. [18:10:22] <j22> i did not do anything after I purchased the board
  523. [18:10:27] <j22> it said dual core
  524. [18:10:43] <j22> do I need to do something ?
  525. [18:11:50] * mlocke (~Adium@nat/ti/x-jmiqrdxmnawhraoa) has joined #pandaboard
  526. [18:12:33] <_av500_> no :)
  527. [18:12:52] <noob> wise ones: how do i enable dvi display (I've connected using an hdmi-dvi adapter to a dell monitor that has dvi-in)
  528. [18:13:03] * mlocke1 (~Adium@nat/ti/x-rekihanpdfgiiqaa) has joined #pandaboard
  529. [18:13:11] * negril (~negril@2002:1f10:75c6:0:21f:d0ff:fed4:7584) Quit (Read error: Operation timed out)
  530. [18:14:11] <noob> should i set omapdss.def_disp=lcd?
  531. [18:14:54] * PaulW_cdot (~Paul@142.204.133.81) Quit (Quit: Leaving)
  532. [18:14:59] <_av500_> atm, both ubuntu and pandroid output on the panda hdmi port
  533. [18:15:14] <_av500_> and thus a dvi monitor conmnected there should work
  534. [18:15:20] <_av500_> but, somw monitors dont work
  535. [18:15:31] <noob> i'm trying the L27.10.2-P1..
  536. [18:16:16] * mlocke (~Adium@nat/ti/x-jmiqrdxmnawhraoa) Quit (Ping timeout: 258 seconds)
  537. [18:16:45] <noob> huh..so i have to just try a diff monitor then..
  538. [18:16:59] * negril (~negril@2002:1f10:75c6:0:21f:d0ff:fed4:7584) has joined #pandaboard
  539. [18:17:40] <_av500_> try a tv
  540. [18:17:41] <noob> _av500_: I've connected using the 'dvi' port. should i rather use the 'hdmi' port on pandaboard?
  541. [18:17:47] <_av500_> yes
  542. [18:19:04] <prpplague> j22: cant you pastebin your bootlog?
  543. [18:19:22] <prpplague> j22: and the results of the /proc/cpuinfo
  544. [18:19:34] <noob> woohoo...it's alive...it's alive :D
  545. [18:23:14] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Ping timeout: 260 seconds)
  546. [18:24:33] <j22> prpplague: sure will do that
  547. [18:24:53] <noob> Looks like I have to install GFX drivers
  548. [18:25:58] <noob> I've downloaded the install file. not sure if i should run it on the host machine or just copy to sd card (rootfs)
  549. [18:26:53] <noob> after a few seconds of display, monitor went to sleep and console is not responsive....('Suspending Console(s)')
  550. [18:28:41] <j22> prpplague: I dont have internet on the board yet
  551. [18:29:00] <j22> so I cant pastebin the boot log
  552. [18:29:15] <j22> I am trying to setup the internet
  553. [18:29:32] <j22> but I am facing a problem with that too
  554. [18:29:37] <jayabharath> j22: console via UART?
  555. [18:29:52] <prpplague> j22: you don't have a serial console?
  556. [18:29:54] <j22> no HDMI display
  557. [18:30:08] <j22> I mean I am using a HDMI display
  558. [18:30:41] <j22> since the Mac address is changing everytime I reboot..I am not able to connect to the internet
  559. [18:30:56] <j22> since I am assigned an IP based on the Mac address
  560. [18:31:06] <j22> how do I fix the Mac address?
  561. [18:31:52] <jayabharath> j22: you can't .. however you can do the following .. http://groups.google.com/group/pandaboard/browse_thread/thread/c2aa5691ddf775e8
  562. [18:32:40] <j22> I tried that
  563. [18:32:50] <j22> but apparently the link to that patch is missing
  564. [18:32:59] <j22> the project is not found now
  565. [18:33:08] <j22> any idea where I can get that patch
  566. [18:34:37] <jayabharath> if you are using a latest ubuntu kernel I believe the patch was merged me..
  567. [18:34:43] <jayabharath> let me find the patch
  568. [18:34:50] <jayabharath> so that you can double check
  569. [18:35:13] <j22> ok
  570. [18:39:09] <j22> prpplague: I copied the /proc/cpuinfo
  571. [18:39:11] <j22> http://pastebin.ubuntu.com/610736/
  572. [18:39:48] <prpplague> j22: see line 4
  573. [18:39:53] <prpplague> j22: processor 0
  574. [18:40:03] <prpplague> j22: see line 6 ?
  575. [18:40:06] <prpplague> j22: processor 1
  576. [18:40:10] <j22> yes
  577. [18:40:17] <j22> thats the thing
  578. [18:40:21] <j22> its just 1 processor
  579. [18:40:26] <j22> when its actually dual core
  580. [18:40:36] <prpplague> j22: no
  581. [18:40:45] <prpplague> j22: processor 0 is the first processor
  582. [18:40:48] * mlocke1 is now known as mlocke
  583. [18:40:51] <prpplague> j22: process 1 is the second processor
  584. [18:40:57] <j22> oh ok
  585. [18:41:01] <j22> did not realize that
  586. [18:41:02] <ds2> note: 1+1 = 2 despite what might have been said or asserted.
  587. [18:41:03] <j22> thanks
  588. [18:41:04] <ds2> ;)
  589. [18:41:38] * mgaunard (~mgaunard@lri5-31.lri.fr) Quit (Ping timeout: 276 seconds)
  590. [18:41:42] <j22> jayabharath: any luck with the patch?
  591. [18:42:07] <jayabharath> j22:ref : https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/673504
  592. [18:42:19] <jayabharath> it points you to a upstream patch
  593. [18:43:34] <jayabharath> if you want to stick with 1 specifc address at every booth the patch is http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-maverick.git;a=commitdiff;h=10f38b455e75b85f72e98786e5518cf7b0324634;hp=f62e143182cc123fdfdf9bb88952a938af7d86e8
  594. [18:44:02] <jayabharath> ofcourse you need to pass it in the boot args etc.. as mentioned in the mail thread (nicolas's response)
  595. [18:45:23] <prpplague> GrueMaster: ping
  596. [18:49:35] * PaulW_cdot (~Paul@142.204.133.81) has joined #pandaboard
  597. [18:50:47] * jayabharath (~jayabhara@nat/ti/x-phucevasuzrwqjkb) Quit (Remote host closed the connection)
  598. [18:51:30] * jayabharath (~jayabhara@nat/ti/x-zubdvnxkvvpttyhd) has joined #pandaboard
  599. [18:52:01] * pfefferz (~zpfeffer@linaro/pfefferz) Quit (Quit: Leaving)
  600. [18:52:04] * gustavoz (~gustavoz@host253.201-252-48.telecom.net.ar) Quit (Quit: Leaving)
  601. [18:53:44] <GrueMaster> prpplague: pong
  602. [18:54:10] <prpplague> GrueMaster: what kind of problems are you having with omap4boot ?
  603. [18:54:39] * mrc3 (~ddiaz@189.157.117.129) Quit (Ping timeout: 240 seconds)
  604. [18:55:00] * mgaunard (~mgaunard@lri5-58.lri.fr) has joined #pandaboard
  605. [18:55:03] <GrueMaster> When booting with our kernel, I get errors from the usb bus when trying to initialize ethernet or usb devices.
  606. [18:55:21] <GrueMaster> see http://paste.ubuntu.com/609804/
  607. [18:55:52] <GrueMaster> Using the same kernel & initrd booting from SD with x-loader & u-boot works fine.
  608. [18:56:57] <_av500_> GrueMaster: and what is your kernel loader fomr usb?
  609. [18:57:04] <_av500_> uboot or something else?
  610. [18:57:18] <GrueMaster> I'm using the aboot that comes with omap4boot.
  611. [18:57:22] <armin76> orbarron: i don't think i'll have it for today, had some issues
  612. [18:57:35] <_av500_> GrueMaster: ok and does aboot do the same setup that uboot does?
  613. [18:57:42] <GrueMaster> When I send u-boot through instead of the kernel, u-boot fails to detect mmc.
  614. [18:57:42] * bo09 (~borgan@ip68-105-60-156.pn.at.cox.net) Quit (Quit: Leaving)
  615. [18:57:57] <orbarron> armin76: /me tried you setup but I believe it is out of date...
  616. [18:58:05] <GrueMaster> afaik, aboot is a stripped down version of x-loader.
  617. [18:58:07] * bo09 (~borgan@ip68-105-60-156.pn.at.cox.net) has joined #pandaboard
  618. [18:58:14] <armin76> orbarron: uh?
  619. [18:58:22] <_av500_> GrueMaster: i doubt that is enough
  620. [18:58:29] <_av500_> uboot (sadly) does more
  621. [18:58:33] <orbarron> http://dev.gentoo.org/~armin76/arm/pandaboard/install.xml
  622. [18:58:34] <prpplague> GrueMaster: looking at the pastebin now
  623. [18:58:54] <armin76> orbarron: what exactly is out of date? it should work, i'm working on the .38 doc
  624. [18:59:03] <orbarron> hmm...
  625. [18:59:38] * orbarron not exactly sure.. i never touched gentoo before so this is a learning curve for me
  626. [18:59:40] <armin76> also there is an issue with the script for creating the partitions if your mmc reader is sd*
  627. [18:59:51] <armin76> s/mmc/sd
  628. [18:59:57] <armin76> sd* = sda/b...
  629. [18:59:59] <prpplague> GrueMaster: most likely it is a clock issue in aboot
  630. [19:00:12] <armin76> alpha boot? :D
  631. [19:00:18] <prpplague> GrueMaster: there was a change in how the refclk for the phy is handled
  632. [19:00:28] <prpplague> GrueMaster: let me have a quick look at the source
  633. [19:00:29] <armin76> orbarron: well, tell me what your problem is and i can help :)
  634. [19:00:37] <orbarron> http://pastebin.com/3EuSzwBY -- this is what I see atm
  635. [19:00:53] <GrueMaster> omap4boot is at https://github.com/swetland/omap4boot
  636. [19:00:58] <orbarron> but using a different kernel and uboot and xloader
  637. [19:02:59] <prpplague> GrueMaster: got a link to your kernel source?
  638. [19:03:17] <GrueMaster> It is the ubuntu natty kernel. Let me look.
  639. [19:05:17] <prpplague> GrueMaster: previously the usb phy was setup in the x-loader/aboot , now it is done in the kernel
  640. [19:05:25] <prpplague> GrueMaster: you need to check for this patch - http://dev.omapzoom.org/?p=integration/kernel-ubuntu.git;a=commit;h=7d7e9392ac5ebe8a157c1c94704f79ef2fd41b9d
  641. [19:05:26] <GrueMaster> git://kernel.ubuntu.com/ubuntu/ubuntu-natty.git use the ti-omap4 branch.
  642. [19:05:33] * prpplague looks
  643. [19:05:53] * amarsman_nl (~marsman@89.184.175.76) Quit (Ping timeout: 276 seconds)
  644. [19:06:13] <armin76> orbarron: you forgot to edit inittab
  645. [19:06:37] * orbarron checks
  646. [19:06:55] * mrc3 (~ddiaz@189.157.118.182) has joined #pandaboard
  647. [19:07:24] * juana (bd924a93@gateway/web/freenode/ip.189.146.74.147) has joined #pandaboard
  648. [19:08:20] <prpplague> GrueMaster: looks like the patch is there
  649. [19:08:29] <GrueMaster> ok
  650. [19:08:37] <prpplague> GrueMaster: let me check the pin mux
  651. [19:08:42] <GrueMaster> (I was just getting there)
  652. [19:09:06] <armin76> orbarron: and while you're at it make sure you did the securetty part as well :)
  653. [19:09:12] <rsalveti> prpplague: we have this patch already
  654. [19:09:32] <rsalveti> prpplague: I was able to sync the pinmux and clock settings from current gitorious's x-loader and u-boot on aboot
  655. [19:09:32] <prpplague> rsalveti: ahh
  656. [19:09:36] <rsalveti> and still saw the same issue
  657. [19:09:46] * Magdalena (~tisoldel@nat/ti/x-qcygqucqqkoaprjq) has joined #pandaboard
  658. [19:09:49] <prpplague> rsalveti: hmm ok interesting
  659. [19:09:54] <rsalveti> so it seems that once you boot with otg we may need to clean or disable some other usb parts
  660. [19:09:58] <rsalveti> clocks or whatever
  661. [19:10:04] <prpplague> rsalveti: i'm not having this trouble with mainline .38 or 39
  662. [19:10:11] * CaptainCrunch (~ken@HSI-KBW-078-042-073-011.hsi3.kabel-badenwuerttemberg.de) has joined #pandaboard
  663. [19:10:17] <rsalveti> prpplague: with aboot?
  664. [19:10:22] <prpplague> rsalveti: yea
  665. [19:10:31] <rsalveti> hm, would be good to check
  666. [19:10:37] <orbarron> armin76: hmm now getting to login --- on android kernel :)
  667. [19:10:41] <rsalveti> let me fire up a build of 39 mainline
  668. [19:10:53] * lanthan (~ze@p54B7F5F4.dip.t-dialin.net) has joined #pandaboard
  669. [19:10:55] <rsalveti> prpplague: do you know if we need any extra patch for 39?
  670. [19:11:03] <rsalveti> or using mainline directly should be enough?
  671. [19:11:28] <prpplague> rsalveti: http://www.elinux.org/Panda_How_to_kernel_2_6_39rel
  672. [19:11:39] <prpplague> rsalveti: you'll need to turn on ehci in the config for stock
  673. [19:12:45] <rsalveti> prpplague: awesome, let me try that
  674. [19:12:54] * lanthan (~ze@p54B7F5F4.dip.t-dialin.net) Quit (Max SendQ exceeded)
  675. [19:13:52] * lanthan (~ze@p54B7F5F4.dip.t-dialin.net) has joined #pandaboard
  676. [19:14:22] <prpplague> oh looks like you have OHCI turned on
  677. [19:14:39] <prpplague> turn that off first
  678. [19:15:20] <rsalveti> hm, ok
  679. [19:16:15] <prpplague> oh, how are you powering the board?
  680. [19:16:23] <rsalveti> prpplague: external power
  681. [19:16:25] <GrueMaster> Using external ps.
  682. [19:16:45] <prpplague> ahh ok
  683. [19:16:48] <GrueMaster> When I need to hard power cycle, I unplug from the wall.
  684. [19:17:13] <GrueMaster> That keeps the board from switching to the usb for power.
  685. [19:17:17] <prpplague> GrueMaster: ahh
  686. [19:17:57] <orbarron> armin76: ok got to shell now
  687. [19:17:58] * amarsman_nl (~marsman@52488909.cm-4-1c.dynamic.ziggo.nl) has joined #pandaboard
  688. [19:18:00] * JimmyDB (~JimmyDB@75-133-50-251.dhcp.trcy.mi.charter.com) has left #pandaboard
  689. [19:18:46] <rsalveti> prpplague: building 39 with http://www.elinux.org/images/c/cb/Config.2.6.39.1
  690. [19:18:53] <rsalveti> will also try to remove OHCI from our kernel and see
  691. [19:19:25] <_av500_> rsalveti: why do you have ohci at all?
  692. [19:19:29] <_av500_> on what port?
  693. [19:19:44] <_av500_> afaik its ohci or ehci per port
  694. [19:20:18] <rsalveti> _av500_: don't know, probably because we enable most of the stuff
  695. [19:21:31] <GrueMaster> Isn't ohci needed for low speed usb devices?
  696. [19:22:11] <GrueMaster> (i.e. keyboards, mice, etc)
  697. [19:22:41] <prpplague> GrueMaster: yes and no
  698. [19:23:04] <prpplague> GrueMaster: if you are using the ohci in conjunction with the ehci on a single port yes
  699. [19:23:31] <prpplague> GrueMaster: but we have the EHCI directly connected to the LAN9514 which then handles low and full speed devices
  700. [19:23:36] * j22 (816178c8@gateway/web/freenode/ip.129.97.120.200) Quit (Ping timeout: 252 seconds)
  701. [19:23:38] <prpplague> GrueMaster: so no need for ohci to be enabled
  702. [19:23:45] <GrueMaster> ok
  703. [19:23:49] <GrueMaster> Good to know.
  704. [19:27:49] <orbarron> armin76: Code Listing??7.1: Emerging net-misc/ntp -- I am seeing the following --> http://pastebin.com/AdckRf8M
  705. [19:27:55] <orbarron> did I miss a file?
  706. [19:28:11] * cheasee (~vchrizz@78.142.179.175) Quit (Ping timeout: 240 seconds)
  707. [19:28:40] * cheasee (~vchrizz@78.142.179.175) has joined #pandaboard
  708. [19:36:40] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #pandaboard
  709. [19:38:56] <armin76> orbarron: yes, either run emerge --sync(will take a while) or extract a portage snapshot
  710. [19:39:20] <armin76> for --sync you need internet connection
  711. [19:39:50] <calculus> that was code listing 5.2
  712. [19:40:41] <calculus> I guess with 5.2 being optional, the ntp step in 7.1 would also be optional (or at least a mention of having to 5.2 first)
  713. [19:42:46] <armin76> calculus: indeed you're right, i'll fix that
  714. [19:42:58] <armin76> i still need to fix the sd card thingy :)
  715. [19:44:06] <calculus> also, openrc is stable, would that change how inittab and other things are configured
  716. [19:44:35] <armin76> correct, but we're unable to build stage3's with openrc yet
  717. [19:44:37] <armin76> kinda sucks...
  718. [19:44:42] <rsalveti> prpplague: http://paste.ubuntu.com/610770/
  719. [19:44:52] <rsalveti> upstream aboot with 39
  720. [19:44:53] <calculus> bummer
  721. [19:45:02] <rsalveti> prpplague: still a lot of errors at ehci
  722. [19:45:38] <rsalveti> got the config posted at the wiki without OHCI
  723. [19:46:51] <rsalveti> brb, going to get my car
  724. [19:49:00] <GrueMaster> brb. Errands.
  725. [20:06:10] * trem (~trem@AToulouse-256-1-137-33.w90-45.abo.wanadoo.fr) Quit (Ping timeout: 248 seconds)
  726. [20:07:14] * juana (bd924a93@gateway/web/freenode/ip.189.146.74.147) Quit (Ping timeout: 252 seconds)
  727. [20:07:21] <_av500_> prpplague: ohci and ehci on the same port makes no sense
  728. [20:07:38] <_av500_> the phy pinout is different between ohci and ehci
  729. [20:08:49] * trem (~trem@AToulouse-256-1-137-33.w90-45.abo.wanadoo.fr) has joined #pandaboard
  730. [20:10:33] <mru> guess why Beagle Classic only supports high-speed devices
  731. [20:10:42] <mru> without a hub
  732. [20:13:30] <_av500_> yes, but 3530 was even more limited
  733. [20:13:44] <_av500_> there, all 3 ports had to be ohci or ehci
  734. [20:14:02] <_av500_> that is supposed to be fixed in 37xx
  735. [20:17:07] <mru> that was a mistake, no?
  736. [20:17:19] <_av500_> yes
  737. [20:17:44] <prpplague> _av500_: i was speaking in very simplified terms
  738. [20:18:16] <orbarron> armin76: where is portage-latest.tar.bz2?
  739. [20:18:27] <prpplague> rsalveti: interesting
  740. [20:18:46] <prpplague> rsalveti: i'll have to pull a fresh copy of omap4boot to see if there is an issue
  741. [20:19:19] <_av500_> boot uboot from aboot and see
  742. [20:19:27] <_av500_> then add iboot and eboot
  743. [20:19:45] <rsalveti> if I boot with u-boot it can't find the sd card
  744. [20:19:51] <rsalveti> I mean aboot + u-boot
  745. [20:20:11] <_av500_> prolly becauase rom code did not enable it
  746. [20:20:20] <_av500_> since you boot from usb
  747. [20:20:28] <rsalveti> yup
  748. [20:20:41] <_av500_> well, fix it :)
  749. [20:21:02] <prpplague> rsalveti: i'm still working on a board bringup, i'll see if i have time to look at it
  750. [20:21:07] <rsalveti> I want to fix aboot + kernel
  751. [20:21:18] <rsalveti> prpplague: cool, thanks a lot
  752. [20:23:18] <prpplague> rsalveti: which u-boot are you testing with?
  753. [20:23:25] <rsalveti> prpplague: mainline
  754. [20:23:35] <prpplague> rsalveti: ahh ok
  755. [20:23:44] <_av500_> prpplague: sdcard is mmc2?
  756. [20:24:12] <prpplague> _av500_: mmc1
  757. [20:24:18] <_av500_> ah yes
  758. [20:28:00] <orbarron> armin76: nevermind found it
  759. [20:28:31] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 258 seconds)
  760. [20:32:08] * jayabharath (~jayabhara@nat/ti/x-zubdvnxkvvpttyhd) Quit (Ping timeout: 276 seconds)
  761. [20:32:34] * jayabharath (~jayabhara@adsl-99-52-85-113.dsl.rcsntx.sbcglobal.net) has joined #pandaboard
  762. [20:33:44] * jayabharath (~jayabhara@adsl-99-52-85-113.dsl.rcsntx.sbcglobal.net) Quit (Remote host closed the connection)
  763. [20:34:27] * jayabharath (~jayabhara@nat/ti/x-podowspobzladlqa) has joined #pandaboard
  764. [20:41:55] <orbarron> armin76: how does this take if I just use the portage snapshot?
  765. [20:43:47] * plm (~plm@65.111.170.40) Quit (Quit: leaving)
  766. [20:51:19] <trem> nite all, sweet dreams
  767. [20:58:48] * CaptainCrunch (~ken@HSI-KBW-078-042-073-011.hsi3.kabel-badenwuerttemberg.de) Quit (Read error: Operation timed out)
  768. [20:59:00] * trem (~trem@AToulouse-256-1-137-33.w90-45.abo.wanadoo.fr) Quit (Quit: Ex-Chat)
  769. [21:04:02] * jayabharath (~jayabhara@nat/ti/x-podowspobzladlqa) Quit (Quit: bye)
  770. [21:11:00] * mlocke (~Adium@nat/ti/x-rekihanpdfgiiqaa) Quit (Quit: Leaving.)
  771. [21:15:46] <calculus> orbarron: it should just work, the snapshot is just that a snapshot of the tree at a certain time
  772. [21:16:02] <calculus> emerge --sync will bring it up to date with the current tree
  773. [21:16:20] * orbarron has no ethernet atm
  774. [21:16:34] <calculus> oh, then no emerging of ntp for you either
  775. [21:16:45] <orbarron> yeah
  776. [21:16:59] <orbarron> can I do this without network?
  777. [21:17:32] <orbarron> cuz i am seeing a bunch of this atm using the tar: tar: portage/metadata/cache/sys-kernel/gentoo-sources-2.6.38-r4: Cannot open: No such file or directory
  778. [21:17:54] <calculus> those should be in the snapshot
  779. [21:18:00] <calculus> unless you ran out of disk
  780. [21:18:04] <orbarron> ah
  781. [21:18:10] <orbarron> that could be the issue
  782. [21:18:19] <orbarron> what size of SD card do I need?
  783. [21:18:23] * orbarron using 2GB
  784. [21:18:30] <orbarron> for rootfs
  785. [21:19:04] <calculus> I have an 8GB, but I might just be over 2GB used (definitely under 4GB)
  786. [21:19:23] * orbarron upgrades to 4GB then
  787. [21:21:12] <prpplague> rsalveti: ping
  788. [21:21:41] <rsalveti> prpplague: pong
  789. [21:22:28] <prpplague> rsalveti: hey can you disable ehci in your kernel and boot to a shell prompt. then use devmem2 (or whatever util you prefer) to dump a few registers?
  790. [21:22:52] <calculus> and for getting packages without the network you can run "emerge --fetchonly --pretend ntp" and you will get a list of urls, you can then download those files on another machine and put them in /usr/portage/distfiles
  791. [21:23:06] <rsalveti> prpplague: sure, hold on
  792. [21:23:17] <orbarron> thanks
  793. [21:23:28] * orbarron tries again on 4GB
  794. [21:25:47] * PaulW (~PaulW@CPE001310360dac-CM001e6b0f7310.cpe.net.cable.rogers.com) has joined #pandaboard
  795. [21:26:45] <orbarron> hello PaulW
  796. [21:39:11] * robclark (~robclark@nat/ti/x-bwwwcjeubyerusan) Quit (Ping timeout: 240 seconds)
  797. [21:42:55] <noob> folks... so I did install GFX drivers...much better now. how do i enable the ether interface (and then network connection)?
  798. [21:51:12] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Ping timeout: 248 seconds)
  799. [21:52:38] * ndec (~a0919116@192.91.60.10) has joined #pandaboard
  800. [21:53:19] <orbarron> noob: on what rls?
  801. [21:54:33] <orbarron> noob: if you are using L27.12.1-P2 then you are the first to test that
  802. [21:54:43] <orbarron> make sure you update the wiki once you have it working :)
  803. [22:01:09] * BThompson (~a0193480@nat/ti/x-ygvkailqhqroepys) has joined #pandaboard
  804. [22:04:37] <rsalveti> prpplague: ok, finally
  805. [22:04:41] <rsalveti> 39 without ehci
  806. [22:04:45] <rsalveti> and without ohci
  807. [22:04:48] <rsalveti> with devmem2
  808. [22:07:15] <prpplague> rsalveti: ok
  809. [22:07:16] * nhg (~a0864305@nat/ti/x-bhdvcexsyqaszmfo) Quit (Quit: Leaving.)
  810. [22:07:45] <prpplague> rsalveti: now can we get the values for 0x4a30a31c
  811. [22:07:57] <prpplague> rsalveti: and 0x4a30a110
  812. [22:08:09] <rsalveti> Value at address 0x4A30A31C (0x401b531c): 0x100
  813. [22:08:22] <rsalveti> Value at address 0x4A30A110 (0x40145110): 0x0
  814. [22:09:38] * Bryanstein (~Bryanstei@shellium/admin/bryanstein) Quit (Read error: Connection reset by peer)
  815. [22:13:23] <noob> @orbarron: :-) I'm on L27.10.2. haven't messed with L27.12 (libz issue yesterday..)
  816. [22:14:02] <rsalveti> prpplague: anything else?
  817. [22:15:14] * Bryanstein (~Bryanstei@shellium/admin/bryanstein) has joined #pandaboard
  818. [22:16:32] <prpplague> rsalveti: let me look those values over
  819. [22:16:34] <prpplague> rsalveti: thanks
  820. [22:17:39] <rsalveti> prpplague: cool
  821. [22:17:55] <orbarron> noob: i did not test Ethernet on that rls.. I believe members were saying that not working
  822. [22:18:09] * orbarron suggest you check the mailing list
  823. [22:18:25] <noob> @orbarron: I'm going to try the wlan/bt patch to see if i can get wlan going....
  824. [22:19:52] <orbarron> wlan works
  825. [22:23:53] * ndec (~a0919116@192.91.60.10) Quit (Ping timeout: 252 seconds)
  826. [22:27:31] <prpplague> rsalveti: yea those values are incorrect
  827. [22:28:19] <rsalveti> prpplague: because of the rom code?
  828. [22:28:27] <rsalveti> as I'm booting from otg
  829. [22:29:06] * dankobum (~rolf@p5B2E7F7F.dip.t-dialin.net) Quit (Read error: Operation timed out)
  830. [22:29:23] <prpplague> rsalveti: there is some code in x-loader that is suppose to set those up, i suspect it isn't in aboot
  831. [22:29:29] <prpplague> rsalveti: give me a few to verify
  832. [22:30:21] <rsalveti> prpplague: sure
  833. [22:35:12] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) has joined #pandaboard
  834. [22:35:47] * webchatter (webchatter@rrcs-74-62-119-2.west.biz.rr.com) Quit (Quit: HydraIRC -> http://www.hydrairc.com <- Po-ta-to, boil em, mash em, stick em in a stew.)
  835. [22:41:14] <noob> @orbarron: yep. working wlan. however, browser seems to crash after about 3 seconds (loads home page-google and crashes before it is done)
  836. [22:41:45] <orbarron> hmm
  837. [22:42:11] * orbarron not sure about that -- there was some post regarding it browser crashing
  838. [22:43:59] * PaulW (~PaulW@CPE001310360dac-CM001e6b0f7310.cpe.net.cable.rogers.com) Quit (Ping timeout: 260 seconds)
  839. [22:49:06] * bambee (~quassel@77.196.57.100) Quit (Remote host closed the connection)
  840. [22:57:06] * prpplague (~danders@nat/ti/x-sonnpjrjoqofcqph) Quit (Quit: Leaving)
  841. [23:07:36] * Sage_ (sage@unaffiliated/sage) has joined #pandaboard
  842. [23:08:51] * Sage (sage@unaffiliated/sage) Quit (Ping timeout: 246 seconds)
  843. [23:08:52] * boegholm (~boegholm@static.88-198-53-70.clients.your-server.de) Quit (Ping timeout: 246 seconds)
  844. [23:08:52] * boegholm (~boegholm@static.88-198-53-70.clients.your-server.de) has joined #pandaboard
  845. [23:09:21] * orbarron (~orb@nat/ti/x-voesnfniezlezppk) has left #pandaboard
  846. [23:10:55] * SGold (~Stan@cpe-075-176-065-103.carolina.res.rr.com) has joined #pandaboard
  847. [23:17:46] * noob_PB (0ce9cae3@gateway/web/freenode/ip.12.233.202.227) has joined #pandaboard
  848. [23:19:02] * Alison_Chaiken (~Alison_Ch@209-204-189-70.dsl.static.sonic.net) Quit (Quit: Leaving)
  849. [23:19:05] <noob_PB> @orbarron: hello from pandaboard. Had to turn off gps to avoid browser-crash.
  850. [23:19:54] * noob_PB (0ce9cae3@gateway/web/freenode/ip.12.233.202.227) Quit (Client Quit)
  851. [23:20:51] * Thor` (~thor@vips.webbredaktoren.se) has joined #pandaboard
  852. [23:20:54] <Thor`> hey
  853. [23:21:27] <Thor`> I'm currently in France and I d'like to order de Panda board
  854. [23:21:38] <Thor`> do you know where to find one ?
  855. [23:21:42] <Thor`> And it's price, also ?
  856. [23:23:27] * The_Boy (~The_Boy@bas2-kanata16-1176468200.dsl.bell.ca) has joined #pandaboard
  857. [23:23:35] <The_Boy> hi is armin on
  858. [23:24:29] <The_Boy> hi prp
  859. [23:24:40] <The_Boy> do you have a minute
  860. [23:28:20] * The_Boy (~The_Boy@bas2-kanata16-1176468200.dsl.bell.ca) has left #pandaboard
  861. [23:33:03] * The_Boy (461f7ae8@gateway/web/freenode/ip.70.31.122.232) has joined #pandaboard
  862. [23:33:21] * SGold (~Stan@cpe-075-176-065-103.carolina.res.rr.com) Quit (Quit: Leaving)
  863. [23:34:14] <The_Boy> hi folks is there gentoo help on?
  864. [23:34:46] * Alex_Stevens (~Alex_Stev@14-202-3-75.static.tpgi.com.au) has joined #pandaboard
  865. [23:35:22] <The_Boy> just got gentoo up on my panda but dont know hoe to change the eth0 to usb0?
  866. [23:36:40] <thomasg> it's just a name, why care?
  867. [23:37:16] <The_Boy> on boot fails to find ethernet!
  868. [23:38:19] <thomasg> but the device is there and ifconfig (or iproute2's 'ip') can find it?
  869. [23:39:14] <The_Boy> yes if i ipconfig usb0 its there
  870. [23:40:13] <thomasg> so what exactly fails?
  871. [23:40:25] <The_Boy> sorry ifconfig usb0
  872. [23:41:20] <The_Boy> INIT: Entering runlevel: 3 * One of the files in /etc/{conf.d,init.d} or /etc/rc.conf * has a modification time in the future! * One of the files in /etc/{conf.d,init.d}
  873. [23:41:26] <The_Boy> opps sorry
  874. [23:41:31] * bo09 (~borgan@ip68-105-60-156.pn.at.cox.net) Quit (Quit: Leaving)
  875. [23:42:01] <The_Boy> cant start net.eth0
  876. [23:42:31] <thomasg> in that case, just remove /etc/init.d/net.eth0 (and rc-update del net.eth0 default)
  877. [23:43:15] <thomasg> alternatively you can modify /etc/udev/rules.d/70-persistent-net.rules to rename the interface
  878. [23:47:45] * Artanis (~nolodigo@152.64.60.213.dynamic.mundo-r.com) has joined #pandaboard
  879. [23:52:21] <The_Boy> well tried both the first and for the secound /etc/udev/rules.d/70-persistent-net.rules does not exist

These logs were automatically created by PandaLgBt on irc.freenode.net using the Java IRC LogBot.

See http://microformats.org/wiki/mflogbot for more information.